Open Access Open Access  Restricted Access Subscription Access

A Piezoelectric Green Energy Source for Powering Traffic Lights and Charging Mobile Phones

R. A. Ofosu

Abstract


Electricity has become a major need of present day civilization and its demand is increasing rapidly. This increasing demand renders some electrical loads unable to function; these loads may be the traffic lights on our roads which use the national grid as their main source of power supply. In order to satisfy the rising energy demands of electricity, a cleaner and renewable power source needs to be explored. This paper emphasized on one of the promising electricity generation methods using piezoelectric materials. In this work the Navy type III Lead Zirconate Titanate (PZT) material was employed. A circuit was designed to convert the pressure from moving vehicles on our roads into an electric power to power the traffic lights and also charge mobile phones. In the design, microcontroller was used to read the charging rate of the battery and the result was displayed on a Liquid Crystal Display (LCD). The design was simulated using Proteus 8.3 Professional software. The results from the simulations indicated that the power generated is sufficient to power the traffic lights and also charge mobile phones.

Full Text:

PDF

References


Chithra P, Devika S, Davood KK, Vinila ML (2015), “Electricity Generation using Piezo-Road withAutomatic Traffic Light and Street Light Control”, International Journal of Engineering Research in Electronics and Communication Engineering, Volume 2, Issue 4, pp. 10−14.

Niraj P, Anuj G, Ebin B, Santhosh N (2014), “Footstep Energy Harvester using Piezoelectric Transducer”, International Journal of Latest Technology in Engineering, Management and Applied Science, Volume 3, Issue 7, pp. 54−57.

Seonghoon K, Junan S, Mohammad A (2015), “Piezoelectric-Based Energy Harvesting Technology for Roadway Sustainability”, International Journal of Applied Science and Technology, Volume 5, Issue 1, pp. 20−25.

Kiran B, Aleena PK, Anumol CV, Josnie AT, Nimisha KK (2014), “Footstep Power Generation using Piezo Electric Transducers”, International Journal of Engineering and Innovative Technology, Volume 3, pp. 264−267.

Rutto DM (2015), “Battery Charger Efficiency and Voltage Behavior in Vented Lead Acid Batteries in Kenya”, International Journal of Sciences: Basic and Applied Research, Volume 20, pp. 184−191.

“Traffic and Intersections”, http://www.dialightsignalsandcomponents.com. Accessed: February 25, 2018.

“Texas Instruments”, http://www.ti.com./lit/ds/symlink. Accessed on: February 25, 2018.

Jyoti KA, “Modelling and Analysis of PZT Micro-power Generator”, Unpublished PhD Project Report, Auburn University, Alabama, USA, 2008, pp. 127.

Miller-Wilson, K. (2018), “List of Car Weights”, https://cars.lovetoknow.com/List_of_Car_Weights. Accessed on: February 25, 2018.

“Physical and Piezoelectric Properties of APC Materials”, APC International, https://www.americanpiezo.com/table/apc-materials, Accessed on: February 25, 2018.


Refbacks

  • There are currently no refbacks.