Open Access
Subscription Access
A Review on Machinability of different materials by Turning Process
Abstract
In this review paper the different parameters which influence the mahinability of various materials has to be studied. The various parameters that affect the machinability are feed, speed, depth of cut and tool radius etc. surface roughness of any material is too much influence by these parameters .turning operation are usually two types, dry turning and wet turning. The main aspect of surface quality on machined parts is probably surface integrity, such as roughness and residual stresses. In this exploration paper different streamlining procedure, for example, Taguchi, RSM, and ANN and so on strategy and additionally embed are surveyed. Taguchi technique a capable device for analysis plan is likewise used to upgrade the slicing parameters to accomplish better surface complete and to recognize the best parameter for cost development amid turning. The study reveals that the surface roughness is directly influenced by the spindle speed and feed rate. It is observed that the surface roughness increases with increased feed rate and is higher at lower speeds and vice versa for all feed rates.
References
A. Hamdan, Ahmed A. D. Sarhan and Mohd Hamdi, “An optimization method of the machining parameters in high speed machining of stainless steel using coated carbide tool for best surface finish”, International Journal Adv Manufacturing Technology, Vol. 58, pp. 81–91, 2012
N. Satheesh Kumar, Ajay Shetty, Ashay Shetty, Ananth K, Harsha Shetty, “Effect of spindle speed and feed rate on surface roughness of Carbon Steels in CNC turning” Procedia Engineering 38 (2012) 691 – 697
W.S. Lin, B.Y. Lee, C.L. Wu “Modeling the surface roughness and cutting force for turning” Journal of Materials Processing Technology 108 (2001) 286-293
Uma Maheshwera Reddy Paturi, Yesu Ratnam Maddu, Ramalinga Reddy Maruri, Suresh Kumar Reddy Narala, “Measurement and analysis of surface roughness in WS2 solid lubricant assisted minimum quantity lubrication (MQL) turning of Inconel 718” Procedia CIRP 40 ( 2016 ) 138 – 143
Gabriel Medrado Assis Acayab, Patricia Mun˜oz de Escalona, “Prediction of surface roughness in low speed turning of AISI316 austenitic stainless steel” CIRP Journal of Manufacturing Science and Technology 11 (2015) 62–67
Anupam Agrawal, Saurav Goel, Waleed Bin Rashid, Mark Price, “Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC)” Applied Soft Computing 30 (2015) 279–286
Mustafa Gunay , Emre Yucel “Application of Taguchi method for determining optimum surface roughness in turning of high-alloy white cast iron” Measurement 46 (2013) 913–919
M. Nalbant, H. Go¨kkaya, G. Sur “Application of Taguchi method in the optimization of Cutting parameters for surface roughness in turning” Materials and Design 28 (2007) 1379–1385
K. Bouacha, M.A. Yallese, T. Mabrouki, J.F. Rigal, “Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool”, Int. J. Refract. Met. Hard 28 (3) (2010) 349–361
I. Asilturk, H. Akkus, “Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method”, Measurement 44 (2011) 1697–1704
Mangesh R. Phate, V.H.Tatwawadi “ Mathematical Models of Material Removal Rate & Power Consumption for Dry Turning of Ferrous Material using Dimensional Analysis in Indian Prospective” Jordan Journal of Mechanical and Industrial Engineering Volume 9 Number 1, February.2015 ISSN 1995-6665 Pages 27 - 38
M. Gunay, A. Kacal, Y. Turgut, “Optimization of machining parameters in milling of Ti–6Al–4V alloy using Taguchi method”, e-J. New World Sci. Acad. Eng. Sci. 6 (1) (2011) 428–440
S. A. Hussain, V. Pandurangadu, K.P. Kumar and V.V. Bharathi,“ A Predictive Model for Surface Roughness in Turning Glass Fiber Reinforced Plastics by Carbide Tool (K-20) Using Soft Computing” Jordan Journal of Mechanical and Industrial Engineering, Volume 5, Number 5, Oct. 2011, 433 – 438
Satish Chinchanikar, AV Salve, P.Netake, A, More,S,Kendre and R.Kumar, “Comparative evolution of surface roughness during hard turning under dry and with water based and vegetable oil-based cutting fluids”Procedia Material Science 5(2014) 1966-1975
Varaprasad Bhemuni, Srinivasa Rao Chalamalasetti “Statistical Model for Surface Roughness in Hard Turning of AISI D3 Steel” Jordan Journal of Mechanical and Industrial Engineering Volume 8 Number 6, December 2014 ISSN 1995-6665 Pages 393 – 401
S. Ramesh ,L. Karunamoorthy, K. Palanikumar, “Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5)” Measurement 45 (2012) 1266–1276
Murat Sarıkaya, Abdulkadir Güllü, “Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL” Journal of Cleaner Production 65 (2014) 604e616
R. Shetty, R. Pai, V. Kamath, S.S. Rao, “Study on surface roughness minimization in turning of DRACs using surface roughness methodology and Taguchi under pressured steam jet approach”,
ARPN J. Eng. Appl. Sci. 3 (1) (2008) 59–67
Ilhan Asiltürk, Mehmet Çunkas. “Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method” Expert Systems with Applications 38 (2011) 5826–5832
Konanki M. Naidu, Sadineni Rama Rao “ ANN Based Surface Roughness Prediction In Turning Of AA 6351” International Journal of Engineering Research and Applications, Vol. 3, Issue 4, Jul-Aug 2013, pp.1455-1459
B. Anuja Beatrice, E. Kirubakaran, P. Ranjit Jeba Thangaiah, K. Leo Dev Wins, “Surface Roughness Prediction using Artificial Neural Network in Hard Turning of AISI H13 Steel with Minimal Cutting Fluid Application” Procedia Engineering 97 ( 2014 ) 205 – 211
A.M.Badadhe, S. Y. Bhave2, L. G. Navale “ Optimization of Cutting Parameters in Boring Operation” Journal of Mechanical and Civil Engineering 2320–334X, PP: 10-15
D.M. D'Addona, Sunil J Raykar, “Analysis of surface roughness in hard turning using wiper insert geometry” Procedia CIRP 41 ( 2016 ) 841 – 846
K. Palanikumar, F. Mata , J. Paulo Davim “Analysis of surface roughness parameters in turning of FRP tubes by PCD tool” journal of materials processing technology 204 (2008) 469-474.
Junyun Chen, Qingliang Zhao, “A model for predicting surface roughness in single-point Diamond turning” Measurement 69 (2015) 20–30
A.Srithar,K.Palanikumar,B.Durgaprasad, “Experimental Investigation and Surface roughness Analysis on Hard turning of AISI D2 Steel using Coated Carbide Insert” Procedia Engineering 97
(2014) 72 – 77
Hamza Bensouilah Hamdi Aouici , Ikhlas Meddour , Mohamed Athmane Yallese,Tarek Mabrouki, François Girardin, “Performance of coated and uncoated mixed ceramic tools in hard turning process” Measurement 82 (2016) 1–18
Chorng-Jyh Tzeng, Yu-Hsin Lin, Yung-Kuang Yang, , Ming-Chang Jeng, “Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis” journal of materials processing technology 2 0 9 ( 2 0 0 9 ) 2753–2759
Carmita Camposeco-Negrete, “Optimization of cutting parameters for minimizing energy
Consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA” Journal of Cleaner Production 53 (2013) 195e203
Ilhan Asiltürk, Süleyman Nes_eli, Mehmet AlperInce, “Optimisation of parameters affecting surface roughness of Co28Cr6Mo medical material during CNC lathe machining by using the Taguchi and RSM methods” Measurement 78 (2016) 120–128
Sujan Debnath, Moola Mohan Reddy, Qua Sok Yi, “Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method” Measurement 78 (2016) 111–119
Abbas Razavykia, Saeed Farahany, Noordin Mohd Yusof, “Evaluation of cutting force and surface roughness in the dry turning of Al–Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach” Measurement 76 (2015) 170–182
Mite Tomov, MikolajKuzinovski , PiotrCichosz, “Development of mathematical models for surface roughness parameter prediction in turning depending on the process condition” International JournalofMechanicalSciences113(2016)120–132
Refbacks
- There are currently no refbacks.