Analysis and Design of Substrate Integrated Waveguide Bandpass Filter with DGS for Ku-Band Applications

Banu Priya A, Umma Habiba H.

Abstract


The technology of Substrate Integrated Waveguide (SIW) and Defected Ground Structure (DGS) are combined and a novel compact bandpass filter is proposed in this paper. The SIW cavity connected in between two tapered microstrip lines used to provide passband characteristic and it has the advantage of high quality factor, low insertion loss. The proposed filter is designed by square slots connected with narrow slot at the edge is etched on the bottom ground plane in order to provide stopband performance of the filter. Moreover a flexible bandwidth and center frequency can be achieved by proper adjusting the dimensions of the SIW and DGS of the filter. The simulated results used to verify the defected characteristic of the filter. The simulated insertion loss and return loss of the filter operated at center frequency of 13.85GHz are 0.002dB and better than 26dB respectively, which makes it suitable for Ku-band applications. The proposed filter structure has been simulated using Advanced Design Software (ADS).

Full Text:

PDF

References


Xiao-Ping Chen and Ke Wu, “Substrate Integrated waveguide Filters”, IEEE microwave magazine 1527-3342/14, Nov/Dec 2014.

Athira gopinath and Raghul LAl P, “Substrate Integrated waveguide based hybrid cavity filter for Ku-band applications”, International Conference on Communication and Signal Processing, IEEE, 978-1-5090-3800-8/17, 2017.

Fei deng, Sai-wai wong, Rui-sen chen, Shi-fen feng and Quing-xin chu, “An improved compact substrate intergrated waveguide(SIW) bandpass filter with sharp rejection and wide upper stopband”, IEEE, 978-1-4799-8767-2/15, 2015.

Haibo Jiang, Yujie Wang and Lin wang, “Compact microstrip narrow bandpass filter with good selectivity and wide stopband rejection for Ku-band applications”, Progress in Electromagnetic research letters, Vol.57, Pp 55-59, October 2015,

Arjun kumar, M.V.Karthikeyan, “Design and realization of microstrip filters with defected ground structures (DGS)”, International journal on engineering science and technology, pp 679-686, November 2016.

Arjun kumar, Jagannath Malik and M.V. Karthikeyan, “A comparative study of microstrip bandstop filters loaded with various dumbbell-shaped defected ground structure”, International journal of microwave and optical technology, Vol.8, No.2, Pp 53-60, March 2013.

M.Almalkawi, L. Zhu and V.Devabhaktuni, “Dual-mode substrate integrated waveguide bandpass filter with an improved upper stopband performance”, IEEE 978-4577-0509-0/11, 2011.

D.Suhas, C.R.Lakshmi, Zinka Srinivasa Rao and D. Kannadasan, “A systematic implementation of elliptic low pass filter using defected ground structure”, Journal of electromagnetic waves and applications, DOI: 10.1080/09205071.2018.1073635, August 2015.

Girdhari chaudry, Heunjae choi, yongchae jeong, Jongsik lim, Dongsu kim and Jun-chul kim, “Design of dual band bandpass filter using DGS with controllable passband”, IEEE microwave and wireless component letters, Vol.21, No.11, Pp.589-591, November 2011.


Refbacks

  • There are currently no refbacks.