Performance Evaluation of 50HP Three Phase Induction Motor Drive using Vector Control
Abstract
This paper introduces a novel technique for performance evaluation of three phase induction motor drive. A suitable value of DC supply is applied to three phase inverter, which provides controlled three phase ac supply to induction motor. Performance of this 50HP drive is considers for three cases; (a) no load condition (b) half load condition (c) Full load condition. Performance evaluation is also done for dynamic condition. Results obtained from simulation model are satisfactory and shows good dynamic performance of drive.
Full Text:
PDFReferences
M. P. Kazmierkouski and H-Kopcke, “A simple control system for current source induction motor drives,” IEEE Trans. Ind. Appl., voI.21, no.4, pp.617-623. May/June, l985.
Habetler, T. G. Profumo, F. Pastorelli, M. and Tolbert, “Direct Torque Control of Induction Machines Using Space Vector Modulation”, IEEE Transactions on Industry Applications, 1992, Vol.28, No. 5, pp. 1045-1053.
Blaschke, F., “The Principle of Field Orientation as Applied to the New Trans vector Closed Loop Control for Rotating Machines”, Siemens Rev., 1993, Vol.39, No. 5, pp. 217-220.
Cristian Lascu, Ion Boldea and Frede Blaabjerg, “A Modified Direct Torque Control for Induction Motor Sensor less Drive” IEEE Transaction on Power Electronics, vol. 36, no. 1, February 2000.
Mineo Tsuji, Shuo Chen, Katsuhiro Izumi, and Eiji Yamada, “Vector Control System for Induction Motors Using q-Axis Flux with Stator Resistance Identification” IEEE Transaction on Power Electronics, vol. 48, no. 1, February 2001.
Zsolt Beres and Peter Vranka, “FOC of Induction Motor With Current Regulators in Current Reference Frame” IEEE Transaction on Power Electronics, vol. 47, no. 4, august 2001.
Domenico Casadei, Francesco Profumo and Giovanni Serra, “FOC and DTC: Two Viable Schemes for Induction Motors Torque Control” IEEE Transaction on Power Electronics, vol. 17, no. 5, September 2002.
Adnan Derdiyok, Mustafa K. Guven, Habib-ur Rehman, Nihat Inanc, and Longya Xu, “Design and Implementation of a New Sliding-Mode Observer for Speed-Sensor less Control of Induction Machine” IEEE Transaction on Power Electronics, vol. 49, no. 5, October 2002.
Adnan Derdiyok, Habib-ur Rehman, “A New Current Model Flux Observer for Wide Speed Range Sensor less Control of an Induction Machine” IEEE Transaction on Power Electronics, vol. 17, no. 6, November 2002.
Makouf, M. E. H. Benbouzid, “A Practical Scheme for Induction Motor Speed Sensor Field-Oriented Control” IEEE Transaction on Power Electronics, vol. 19, no. 1, March 2004.
Roberto Cardenas and Ruben Pena, “Sensor less Vector Control of Induction Machines for Variable-Speed Wind Energy Applications” IEEE Transaction on Power Electronics, vol. 19, no. 3, March 2004.
Young Ahn Kwon, “A New Scheme for Speed-Sensor less Control of Induction Motor” IEEE Transaction on Power Electronics, vol. 51, no. 3, June 2004
Janne Salomaki, Marko Hinkkanen, and Jorma Luomi, “Sensor less Control of Induction Motor Drives Equipped With Inverter Output Filter” IEEE Transaction on Power Electronics, vol. 53, no. 4, August 2006.
Heising, V. Staudt, A. Steimel, “Speed-sensor less stator-flux-oriented control of induction motor drives in traction”, IEEE Symposium on Sensor less Control for Electrical Drives, 2010, pp.100-106.
Soufyane Chekroun and Abdelkader Mechernene, “A Robust MRAS-Sensor less Scheme Based Rotor and Stator Resistances Estimation of a Direct Vector Controlled Induction Motor Drive” IEEE Transaction on Power Electronic
Refbacks
- There are currently no refbacks.