Open Access Open Access  Restricted Access Subscription Access

Experimental Study on Wear Resistance Behavior in Ceramic Coated and Uncoated Rotary Air Lock

SRIKOUSIK S B, Muthukumar K.

Abstract


The study presents the output on wear resistance of a ceramic coating on Rotary Air Lock in a cement plant located in southern part of India. To analyze the wear resistance properties, the observation was conducted in two different rotary air lock components out of one which is coated with a ceramic layer containing 60%Al2O3 and 40%TiO2; the ceramic coating was done by an atmospheric plasma spraying method. The obtained results from the weight loss test of the uncoated rotary airlock device and the coated rotary air lock indicate that the rotary air lock with a ceramic coating is characterized by high wear resistance.


Full Text:

PDF

References


1. Ş. DANIŞMAN, S. SAVAŞ Erciyes University, Engineering Faculty, Department of Mechanical Engineering Kayseri, Turkey " Tribology in industry, Volume 27, No. 3&4, 2005.

J. Yao, C.-H. Wang, E. W. C. Lim and J. Bridgwater, " Granular attrition in a rotary valve: Attrition product size and shape." Chemical Engineering Science, vol. 61, pp. 3435 – 3451,2006.

3. A. Faeghinia and A. Zamanian. " Wear Resistance of Nano Alumina Containing SiO2-B2O3-Na2O Glass-Ceramic on Steel Substrate." Tribology in Industry Vol. 38, No. 3 (2016) 402-411.

4. Pavan C M and Dr. Narendra Babu B R 2018 " Review of Ceramic Coating on Mild Steel Methods, Applications, and Opportunities." International Journal of Advances in Scientific Research and Engineering, Volume 4, Issue 7 July - 2018.

Corinne Jouanny-Tresy, Michael Vardavoulias, and Michel Jeandin 1995“Using Coated Ceramic Particles toIncrease Wear Resistance in High-Speed Steels," JOM Journal, April 1995.

Tsuyoshi Irisawa, Hiroshi Matsumoto, “Thermal shock resistance and adhesion strength of plasma-sprayed alumina coating on cast iron, Thin Solid Films," 509 (2006), 141-144.

J.J. Kanga, B.S. Xub, H.D.Wanga, bC.B.Wanga. "Influence of spraying parameters on the microstructure and properties of the plasma-sprayedAl2O3TiO2 coating." Physics Procedia 50 (2013),169–176.

Danışman Ş, Odabas D, Teber M. “The Effect of Coatings on the Wear Behavior of Ti6Al4V Alloy Used in Biomedical Application” IOP Conf. Series: Materials Science and Engineering 295 (2018), 012044.

Linmin Wu, Xingye Guo and Jing Zhang "Abrasive Resistant Coatings," Lubricants 2014, 2, 66-89.

Sure, Ma and JianjunZhang “wear resistant high boron cast alloy - a review," Rev. Adv. Mater.Sci.44(2016)54-62.


Refbacks

  • There are currently no refbacks.