The optimization of various parameters of resistance spot welding and microstructural examination

Nilesh Patel

Abstract


This paper represents the optimization of diverse parameters of resistance spot welding. The experimental research was performed under various strain, welding cutting-edge, stress, and welding time. In this investigation the quality feature (tensile electricity) has been taken into consideration the use of Taguchi approach. The experimental studies were carried out various welding currents, weld and preserve times for joining sheets.


Full Text:

PDF

References


Aslanlar S, Ogur A, Ozsarac U, Ilhan E. Welding time impact on mechanical houses of car sheets in electrical resistance spot welding. J MaterDes 2008;29:1427–31..

Luo Yi , Liu Jinhe ,Xu Huibin, Xiong Chengzhi, Liu lin. Regression modeling and process evaluation of resistance spot welding on galvanized metallic sheet

W.H. Yang, Y.S. Tang, layout optimization of slicing parameters for turning operations based on Taguchi method, journal of materials Processing era, eighty four (1998) 122-129.

D.C. Montgometry, layout and evaluation of experiments, 4th edition, big apple: Wiley; 1997.

N. Nalbant, H. Gokkaya, G. Sur, software of Taguchi method inside the optimization of slicing parameters for floor roughness in turning, materials and design, date obtained

Onkar N. Panday “overall exceptional management”

G.S. Peace, Taguchi methods, A fingers-on technique, Addision-Wesley, MA, 1992.

Ross, P.J., Taguchi approach for nice Engineering, 1988 (McGraw-Hill: big apple).

Roy, R.ok., A Primer at the Taguchi approach, 1990 (Van Nostrand Reinhold: ny).

ok. S. Yeung, and P.H. Thornton, “brief Thermal analysis of Spot Welding Electrodes”, Welding research, January, (1999), pp. 1–6.

M. Jou, “Experimental research of Resistance Spot Welding for Sheet Metals used in automobile enterprise”, JSME I.J. series CMechanical systems system factors and production, 2(2001), pp. 544–552.

Welding manual quantity 2 8th version, Welding tactics, element 1 p 534-535

J.f. young and R.S. Shane, Ed., substances And techniques, component B: procedures, third Ed.,Marcel dekker, 1985, p 11257-1126

J.g. Bralla, ed., guide Of Product layout For manufacturing, McGraw-Hill, 1986, p 7-35

Ewing, okay. W., Cheresh, M., Thompson, R., and Kukuchek, P., 1982, ‘‘Static and impact Strengths of Spot-Welded HSLA and coffee Carbon metal Joints,’’ SAE Paper 820281.

VandenBossche, D. J., 1977, ‘‘closing electricity and Failure Mode of Spot Welds in high energy Steels,’’ SAE paper 770214.


Refbacks

  • There are currently no refbacks.