Optimization of Machining Parameters in CW CO2 Laser Cutting for Reduced Kerf Angle and Surface Roughness

Mr. Himanshu. H. Deshmukh, Dr. Nitin . G. Phafat

Abstract


Hot Rolled micro alloy steels (E34) find wide application in automotive sector. They are high quality steels having a blend of all the alluring properties that are not feasible in ordinary mild steel. These steels possess high yield strength, high notch toughness, good fatigue properties, excellent weld ability and better formability. E34 material finds application in construction of ships, railway wagons and carriages, pressure vessels, pipes, heavy duty transport vehicles, earth moving equipment and capacity tanks. The present study reports the application of non-contact type (thermal energy based) continuous wave (CW) CO2 laser cutting process on Hot Rolled micro alloy steels (E34). The process parameters in laser cutting influence the kerf angle and surface roughness. These quality characteristics were observed for the various combinations of cutting parameters like cutting speed, beam power, assist gas pressure, focal length and standoff distance. Experiments were designed using central composite design method of Response surface technology. A significant improvement in the kerf angle and surface roughness was observed with the optimal setting of parameters.


Full Text:

PDF

References


A. Riveiro, F. Quintero, F. Lusquiños, R. Comesaña, J. del Val, J. Pou (2011), The Role of the Assist Gas Nature in Laser Cutting of Aluminum Alloys, Physics Procedia 12 558-554.

Adalarasan R, Santhanakumar M (2015) Application of Taguchi based response surface method (trsm) for optimization of multi responses in drilling Al/SiC/Al2O3 hybrid composite. J Inst Eng (India): Series C 96(1):65–71.

Adalarasan R, Santhanakumar M, Rajmohan M (2015) Optimization of laser cutting parameters for Al6061/SiCp/Al2O3 composite using grey based response surface methodology (GRSM). Measurement 73(1):596–606.

Adalarasan R, Santhanakumar M, Rajmohan M (2015) Application of Grey Taguchi-based response surface methodology (GT-RSM) for optimizing the plasma arc cutting parameters of 304L stainless steel. Int J Adv Manuf Technol 78(5–8):1161–1170.

Aghdeab SH, Mohammed LA, Ubaid AM (2015) Optimization of CNC turning for aluminum alloy using

simulated annealing method. Jordan J Mech Indl Eng 9(1):39 44.

Ahmet Hasc-alık, Mustafa Ay (2013), CO2 laser cut quality of Inconel718 nickel–based superalloy, Optics and laser technology 48 554-564.

Al-Sulaiman F, Yilbas BS, Ahsan M, Karatas C (2009) CO2 laser cutting of Kevlar laminate: influence of assisting gas pressure. Int J Adv Manuf Technol 45(1–2):62–70.

Anders Ivarsona, John Powell, Jukka Siltanen (2015), Influence of alloying elements on the laser cutting process, 15th Nordic Laser Materials Processing Conference, Physics procedia 78 84-88.

Arun Kumar Pandey and Avanish Kumar Dubey (2011), Intelligent Modeling of Laser Cutting of Thin Sheet, International Journal of Modeling and Optimization, 107-112.

Biswas R, Kuar AS, Biswas SK, Mitra S (2010) Effects of process parameters on hole circularity and taper in pulsed Nd:YAG laser microdrilling of Tin-Al2O3 composites. Mater Manuf Process 25(6):503–514


Refbacks

  • There are currently no refbacks.