Open Access Open Access  Restricted Access Subscription Access

Analysis of a High Rise Building Structure with the Effect of Introducing Bracings at the Outer Walls Considering Seismic Load

Mr Shyam Swaroop Patel, Mr Rahul Sathbhaiya


To oppose horizontal quake loads, shear dividers are regularly utilized as a part of RC confined structures, though, steel supporting is the frequently utilized as a part of steel structures. In the previous two decades, various reports have likewise demonstrated the successful utilization of steel propping in RC outlines. Steel propping of RC structures began as a retrofitting measure to reinforce seismic tremor harmed structures or to expand the heap opposing limit of existing structures. In this investigation we are preparing a near report on a G+20 tall structure. In this structure we will contrast exposed edge and casings having X-type bracings at the corners. A three dimensional structure is taken, 20 stories is taken with story tallness of 3m. The bars and sections are intended to withstand dead and live load as it were. Seismic tremor loads are taken by bracings. The bracings are given just on the fringe segments. Here basic displaying and investigation is finished utilizing examination programming which is a limited component based programming device.

Full Text:



Chinwuba. A, Akinloye. A, “Comparison of Wind-Induced Displacement Characteristics of Buildings with Different Lateral Load Resisting Systems,” doi:10.4236/eng.2011. Published Online, March 2011

Siavash. K, “Optimal Conceptual Design of High-Rise Office

Buildings,” A thesis presented to the University of Waterloo in fulfilment of the thesis requirement for the degree of Doctor of Philosophy in Civil Engineering, Waterloo, Ontario, Canada, 200.

Karthik. K. M, Vidyashree. D., “Effect of Steel Bracing on Vertically Irregular R.C.C Building Frames under Seismic Loads,” IJRET: International Journal of Research in Engineering and Technology, pISSN: 2321-7308, Volume 04, June-2015

Umesh. R. B, Shivaraj M, “Seismic Response of Reinforced Concrete Structure by Using Different Bracing Systems,” International Journal of Research in Engineering and Technology, pISSN: 2321-7308, Volume: 03, Sep-2014.

Viswanath. K.G, Prakash. K.B, Anant. D, “Seismic Analysis of Steel Braced Reinforced Concrete Frames,” International Journal of Civil and Structural Engineering, Integrated Publishing services, Volume 1, 2010.

Massumi. A, Tasnimi. A. A, “Strengthening of Low Ductile Reinforced Concrete Frames Using Steel X-Bracings with Different

Details,” The 14th World Conference on Earthquake Engineering October 12-17, 2008, Beijing, China.


  • There are currently no refbacks.