Open Access Open Access  Restricted Access Subscription Access

Comparative Earthquake Analysis of G+10 Story Building With and Without Shear Wall

Ganesh Deshmukh


Shear wall is the main important structural component. These walls can be used to provide greater strength & security to the structure when the structures are exposed to external loads, such as earthquake loads, wind loads, etc. The structural wall provides an efficient fixation system and offers a lot of potential for lateral resistance load. These types of walls mainly play a major role for the construction of high-rise design. The properties of these seismic shear dividers rule in light of the structure, and in this manner it is critical to assess the seismic reaction of the dividers suitably. In this current examination, principle centre is to think about different seismic properties of the Building with and without shear divider. Additionally examined the structure, changing the situation of the shear divider evenly. The performance of the shear wall was studied by four different models. Model 1 is a bare wireframe structural system and other three models of double-type structural system. Earthquake load is applied to building G + Ten histories, located in zone III. Such parameters as side offset, floor drift, baseline offset and period of time are compared

Full Text:



Kalpana P., Prasad R. D. and Kumar B.K. (2016), “Analysis of Building with and without Shear Wall at Various Heights and Variation of Zone III and Zone V”, Int. J. of Engg. Res. and Appli., Volume 6, Issue 12, pp. 5-11, Available at:

Chandiwala A. (2012), “Earthquake analysis of building configuration with different position of shear wall”, Int. J. of Emerg. Tech. and Adv. Engg., Volume 2, Issue 12, pp. 347-353, Available at: https://pdfs.semanticsch

Rana D. and Raheem J. (2015), “Seismic Analysis of Regular & Vertical Geometric Irregular RCC Framed Building”, Int. Res. J. of Engg. and Tech., Volume 2, Issue 4, pp. 1396-1401, Available at: https://www.irjet. net/archives/V2/i4/Irjet-v2i4232.pdf.

Kumar T. A. and Padmanabham K. (2017), Comparative Studies on Construction Cost of High Raise Buildings (Designed under RC Frame and Shear Wall Systems), Volume 4, Issue 3, pp. 86-90, Available at: http://ijste. org/Article.php?manuscript=IJSTEV4I3023.

Damam V. S. (2015), “Comparative Study on Multistoried RCC Structure with and without Shear Wall by using SAP2000 v17”, Int. Res. J. of Engg. and Tech., Volume 2, Issue 7, pp. 1261-1266, Available at: https://www.irjet. net/archives/V2/i7/IRJET-V2I7205.pdf.

Waykule S. B., Pise D. C., Deshmukh C. M., Pawar Y.P., Kadam, S.S., Mohite D. D. and Lale S.V. (2016), “Study of Behaviour of Floating Column for Seismic Analysis of Multistorey Building”, Int. J. of Civil Engg. and Tech., Volume 7, Issue 6, pp. 676-685, Available at: Admin/uploadfolder/IJCIET_07_06_075/IJCIET_07_06_075.pdf.

Uttekar S. D. and Nayak C. R. (2016), “A review on seismic response of RC building on sloping ground”, Int. J. of Engg. Res., Volume 5, Special Issue 3, pp. 701-704, Available at: 27583816/A_Review_on_Seismic_Response_of_RC_Building_on_Sloping_Ground.

Shekh I. U., Redekar U., Rathod K., Sabale S., Ghatule S., Khare P. and Shelke N. L. (2017), “Analysis, Design and Estimation of G+7 Storey Building Structure by using IS Code Methods and by Software's”, Int. J. of Engg. and Manag. Res., Volume 7, Issue 2, pp. 522-528, Available at: https://www.

Kalla E. S., Singh E. O. P. and Choudhary S. (2019), “A review on seismic analysis and sustainability of multi storey structure with and without floating columns”, Int. Res. J. of Engg. and Tech., Volume 6, Issue 7, pp. 2897-2902, Available at:

Singh G. and Singh P. (2017), “Seismic and Buckling Analysis of Floating Column in RCC Framed Structure”, Doctoral dissertation, Lovely professional university, Available at: bitstream/123456789/3481/1/11612432_12_7_2017%2011_31_58%20AM_full%20report.pdf.

Kumar K. P. and Malyadri M. (2018), “Seismic analysis and design of G+15 multistorey residential building - A review”, Int. J. of Pure and Appli. Mathe., Volume 119, Issue 17, pp. 211-216, Available at: df.

Vidyadhar A. S. G. P. H. (2016), “Dynamic wind analysis of tall building provided with steel bracing as per proposed draft for Indian wind code and effect of soft storey (PART 2)”, Int. Res. J. of Engg. and Tech., Volume 3, Issue 10, pp. 519-525, Available at:

Mukundan H. and Manivel S. (2015), “Effect of vertical stiffness irregularity on multi-storey shear wall-framed structures using response spectrum analysis”, Int. J. of Innov. Res. in Sci., Engg. and Tech., Volume 4, Issue 3, pp. 1186-1198, Available at:

Bagheri B., Firoozabad E. S. and Yahyaei M. (2012), “Comparative study of the static and dynamic analysis of multi-storey irregular building”, World Academy of Science, Engineering and Technology, Int. J. of Civil and Enviro. Engg., Volume 6, Issue 11, pp. 1847-1851, Available at: https://publications.

Padol S. R. and Talikoti R. S. (2015), “Review paper on seismic responses of multistored RCC building with mass Irregularity”, Int. J. of Res. in Engg. and Tech., Volume 4, Issue 3, Available at:


  • There are currently no refbacks.