Open Access Open Access  Restricted Access Subscription Access

THE IMPROVEMENT OF LATEST METHODS FOR DETECTING WOOD DEFECTS WITHIN THE RADIAL PATH

Aakash Kumar, Rupali sharma, Meenu jetly, Shobhit kumar gupta

Abstract


Strain wave primarily based techniques have been evolved for evaluating the quality of the timber substances non destructively. but the existing strategies have some shortcomings due to the considerable version of the wooden properties and at the moment are in need of updating. There are also pressure wave primarily based units which have been extensively used for non destructive checking out of wood. however most of them are rigid and incorrect for the tentative research. This paper proposed and implemented a timber non destructive trying out platform based totally on NI virtual device. 3 wooden non destructive checking out strategies, which include top time c program language period size, pass-correlation, and spectrum evaluation, had been additionally tested in this platform with serious decay sample, early decay sample, and defect-unfastened pattern. The effects show that new strategies can be demonstrated easily and the researches of wooden non destructive checking out might be elevated with the designed platform.


Full Text:

PDF

References


C. B. Wessels, F. S. Malan, and T. Rypstra, “A evaluate of measurement techniques used on standing timber for the prediction of a few mechanical residences of wooden,” ecu journal of woodland studies, vol. a hundred thirty, no. 6, pp. 881–893, 2011.

C.-J. Lin, T.-T. Chang, M.-Y. Juan et al., “pressure wave tomography for the quantification of artificial hollow detection in camphor timber (Cinnamomumcamphora),” Taiwan journal of forest technological know-how, vol. 26, no. 1, pp. 17–32, 2011.

F. Longuetaud, F. Mothe, B. Kerautret et al., “automated knot detection and measurements from X-ray CT photos of timber: a evaluate and validation of an advanced algorithm on softwood samples,” computers and Electronics in Agriculture, vol. eighty five, pp. seventy seven–89, 2012.

J. L. Sandoz, Y. Benoit, and L. Demay, “wood checking out using acousto-ultrasonic,” in court cases of the 12th global Symposium on Nondestructive checking out of timber, Sopron, Hungary, September 2000.

X. Wang, F. Divos, C. Pilon, B. k. Brashaw, R. J. Ross, and R. F. Pellerin, “evaluation of decay in standing wood the use of strain wave timing nondestructive assessment gear,” USDA FS wooded area merchandise Laboratory fashionable Technical document FPL-GTR-147, U.S. branch of Agriculture, wooded area service, Washington, DC, u.s.a., 2004.

P. Carter, D. Briggs, R. J. Ross, and X. Wang, “Acoustic trying out to enhance western wooded area values and meet purchaser wooden pleasant wishes,” USDA FS woodland products Laboratory widespread Technical file PNW-GTR-642, US department of Agriculture woodland carrier, Washington, DC, usa, 2005.

B. Kasal and T. Tannert, In Situ evaluation of Structural wooden, Springer, 2011.

R. J. Ross, R. C. DeGroot, W. J. Nelson, and P. k. Lebow, “the connection among strain wave transmission traits and the compressive electricity of biologically degraded timber,” wooded area merchandise journal, vol. 47, no. 5, pp. 89–93, 1997.

G. Li, X. Wang, H. Feng, J. Wiedenbeck, and R. J. Ross, “evaluation of wave velocity patterns in black cherry trees and its impact on internal decay detection,” computers & Electronics in Agriculture, vol. 104, no. 2, pp. 32–39, 2014.

R. L. Amateis and H. E. Burkhart, “Use of the fakopptreesonic acoustic device to estimate timber high-quality traits in loblolly pine timber planted at one of a kind densities,” in proceedings of the 17th Biennial Southern Silvicultural research convention, Shreveport, l. a., u.s.a., March 2015.

R. A. Garcia, A. M. De Carvalho, J. V. De FigueiredoLatorraca, J. L. M. De Matos, W. A. Santos, and R. F. De Medeiros Silva, “Nondestructive assessment of warmth-treated Eucalyptus grandis Hill ex Maiden timber using stress wave approach,” wood technology & technology, vol. 46, no. 1–3, pp. forty one–52, 2012.

J. Xiao, C. Sa, and Y. Han, “Nondestructive trying out of dynamic elastic modulus of wooden-based totally panel by the technique of strain wave,” in proceedings of the ninth international conference on digital measurement & units, Beijing, China, August 2009.

Y. Fang, H. Feng, J. Li, and G. Li, “A DSP primarily based strain wave device for timber decay detection,” worldwide magazine of digital content material generation and Its programs, vol. 5, no. 8, pp. 415–422, 2011.

Q. Wu, L. Wang, and L. Zu, “A LabVIEW-based digital tool machine for laser-triggered fluorescence spectroscopy,” journal of automatic strategies and control in Chemistry, vol. 2011, Article identity 457156, 7 pages, 2011.

M. Yamasaki and Y. Sasaki, “figuring out younger's modulus of wood on the idea of a electricity database and strain wave propagation pace I: an estimation approach for young's modulus using Monte Carlo simulation,” magazine of timber technological know-how, vol. 56, no. 4, pp. 269–275, 2010.


Refbacks

  • There are currently no refbacks.