Open Access Open Access  Restricted Access Subscription Access

Incorporation of Waste Foundry Sand in Producing Alkali Activated Concrete

Basaveshwara G V, Shriram Marathe


The advancement of new, manageable, low-CO2 development materials is basic if the worldwide development industry is to diminish the ecological impression of its exercises, which is brought about especially through the creation of Portland concrete. One sort of non-Portland concrete that is drawing in specifically consideration depends on soluble base alum inosilicate science, including the class of covers that have gotten known as geo-polymers. This survey talks about the union of salt actuated fasteners from impact heater slag, calcined dirt (metakaolin), and fly debris, including examination of the synthetic response systems and folio stage gatherings that control the early-age and solidified properties of these materials, specifically are starting setting and long haul strength. Additionally, squander foundry sand (WFS) is an outcome from the production of both ferrous and nonferrous metal castings. It is top notch silica sand. Foundries utilize great size-explicit silica sands for use in their embellishment and throwing activities. In the throwing procedure, forming sands are reused and reused ordinarily. Points of view for future examination advancements are additionally investigated and furthermore talk about the different examinations completed on squander foundry sand and salt enacted (Geo-polymer) concrete delivered utilizing modern results which in any case considered as garbage removal items.

Full Text:



Gurpreet Singh, Ankush Thakur (2018), “Incorporation of Waste Foundry Sand in Concrete”, Int. J. of Civil Engg. and Tech., Volume 9, Issue 7, pp. 1040–1048, Available at: rnal_uploads/IJCIET/VOLUME_9_ISSUE_7/IJCIET_09_07_109.pdf.

Maria Auxiliadora de Barros Martinsa, Gilbert Silvac and Ivan Felipe Silva dos Santos (2019), “Study on waste foundry exhaust sand, WFES, as a partial substitute of fine aggregates in conventional concrete”, Sustai. Cities and Society, Volume 45, pp. 187-196, Available at: 1016/j.scs.2018.11.017.

Rafat Siddiquea and Gurpreet Singhb (2011), “Utilization of waste foundry sand (WFS) in concrete manufacturing”, Res., Conserv. and Recyc., Volume 55, Issue 11, pp. 885-892, Available at: conrec.2011.05.001.

Angad Morale, Deepak Chaurasiya and A.P. Jaiswal, “Effective utilization of foundry sand and ground granulated blast furnace slag in geo-polymer concrete”, Asian J. of Conver. in Tech., Volume 3, Issue 1, pp. 1-7, Available at: https://pdfs.semanticscholar. org/9550/b800478ba58621b7fd0f268c9cb82cff5eb8.pdf?_ga=2.244981701.1759975460.1597211911-327073988.1594620332.

Elakyah, Kalaivani, Easwaran (2019), “Effect of curing and molarity on geo-polymer concrete with foundry sand”, Int. J. of Sci. Res. and Rev., Volume 7, Issue 3, Available at: 722_2091.pdf.

IS 516: (1959), “Method of Tests for Strength of Concrete”, Bureau of Indian Standards, Manak Bhavan New Delhi, Available at: IS-codes/is.516.1959.pdf.

IS 5816: (1999), “Method of Test Splitting Tensile Strength of Concrete”, Bureau of Indian Standards, Manak Bhavan, New Delhi, Available at: test/IS-codes/is.5816.1999.pdf.


  • There are currently no refbacks.