Open Access Open Access  Restricted Access Subscription Access

Laser machining in today’s advanced Manufacturing Technology

Vasudha singh, kavita shrivastav, priti singh

Abstract


Laser machining is key in today's propelled producing, and made the requirement for littler openings, littler lands, smaller lines and spaces, littler and more controllable spot than any other time in recent memory. Investigation of laser pillar association with materials empowers us to investigate the physical procedures included, better comprehends the laser machining process, and might be dispense with some undesirable reactions and increment proficiency of the machining process. This examination endeavors to lessen the exploratory time and cost connected with setting up process parameters for appointing the central spot and shaft measurement. The examination performed in this work taking into account the explanatory and also trial arrangements system. From the readings got from arrangement of tests with 1% force ought to be alluded for the count. 


Full Text:

PDF

References


John C. Particle, "Laser Processing of Engineering materials", first version 2005, Elsevier Butterworth-heinemann, ISBN 0-7506-6079-1

John Powell, "CO2 Laser cutting", 1993, Springer Verlag, ISBN 3-540-19786-9

Vijay Kancharla. "Fiber lasers for mechanical cutting applications", Proceedings of the 23rd International Congress on Applications of Lasers and Electro-Optics (ICALEO) 2004, Fiber and Disk Lasers pp. 18-22.

Dowden, J. M., 2001, The arithmetic of warm displaying, Chapman and Hall/CRC, Boca Raton, FL.

Dowden, J., P. Kapadia, and R. Ducharme, 1994, Temperature in the crest in entrance welding with a laser, Colorado Springs Conf., Colorado, Transport Phenomena in Materials Processing and Manufacturing (ASME), pp 101

Columbia, 2005, "www.mrl.columbia.edu", Laser micromachining, last went to November 10, 2008


Refbacks

  • There are currently no refbacks.