Open Access
Subscription Access
Performance Analysis of Sandwithed Composite Plates Used for Vibration Absorption
Abstract
The layout of a system foundation is more complex than of a foundation which supports only static loads. If a device is rigidly bolted to the floor, the vibratory movement of the system itself can be reduced, however the vibration transmitted to the floor will be large. This may produce harmful consequences even at massive distances.on this work, an isolation pads are evolved using Natural rubber, Polyurethane and zinc aluminum alloy in the form of composite pads. The study four different combinations using Natural rubber, Polyurethane and zinc aluminum alloy. Numerical analysis is carried out to obtain transmitted accelerations at base plate. Experimentation is done on the set up by using FFT analyzer tool to get the acceleration results at base plate.
References
Eduardo Afonso Ribeiro, Jucélio Tomás Pereira, Carlos Alberto Bavastri, “Passive vibration control in rotor dynamics: Optimization of composed support using viscoelastic materials,” Journal of Sound and Vibration (2015).
Ki Hyun Kim, Soon Ho Yoon, Dai Gil Lee, “Vibration isolation of LNG containment systems due to sloshing with glass fiber composite”
Mahmood M. Shokrieh, Ali Najafi, “Experimental evaluation of dynamic behavior of metallic plates reinforced by polymer matrix composites.” Composite structures (2006).
H.K. Cho, J. Rhee, “Vibration in a satellite structure with a Laminate composite hybrid sandwich panel”, Composite Structures 93 (2011).
James J. Sargianis, Hyung-Ick Kim, Erik Andres, Jonghwan Suhr, “Sound and vibration damping characteristics in natural material based sandwich composites.
Pranit M. Patil, Vijay R. Patil, Ganesh N. Rakate, “An Overview of Disarray in Active Suspension System”, International Journal of Engineering Research and Applications (IJERA), Vol. 3, Issue 3, May-Jun 2013, pp.1156-1160.
Patil VR, Jadhav MM, Pawar GB, Gunjavate PV. Some studies on tribological properties of lubricating oil with nanoparticles as an additive. International Journal of Advanced Engineering Technology. 2014; 01–04.
Vijay R. Patil, Sushant M. Patil, Amar V. Patil, Abhijeet V. Patil, Rohit A. Barawade, Surajkumar G. Kumbhar, “ Vibration Signature Analysis Technique for Detection of Faults in Gearbox System”, International Journal of Trend in Research and Development, Volume 3(3), May - Jun 2016, pp. 626-629.
Pranit M. Patil, Vijay R. Patil, Girish B. Pawar, ““Comparative Study Between The Welded Joints And Bolted Joints For The Supporting Structure Of The Pressure Vessels”– A Review”, International Journal of Engineering Research & Technology (IJERT), Vol. 2 Issue 5, May – 2013, pp. 1432-1435.
Vijay R. Patil, Prof. Dr. Pradip V. Jadhav, Devlopment of Prototype of Light Passanger Quarter Car For Improved Vehicle Ride Charactritics, Springer International Publishing AG 2018, P.M. Pawar et al. (eds.), Techno-Societal 2016, DOI 10.1007/978-3-319-53556-2_87