Open Access Open Access  Restricted Access Subscription Access

Three Winding Coupled Inductor Based Interleaved High Step Up Converter

Bindu KV, Nagarani B, JudeManoj A, Justus Rabi B

Abstract


This paper presents a three winding coupled inductor based interleaved high step up converter for fuel cell based applications. The main aim is to reduce the ripple voltage on output side and to increase the output voltage. Also, the design is to reduce the voltage stress in order to achieve the ZVS (Zero Voltage Switching) and to reduce the leakage current in soft switching method. Converter is designed for high frequency range of 20 kHz is simulated. The output side connects the T-filter to reduce the output ripple voltage. The
converter achieves high step-up voltage gain with appropriate duty ratio and low voltage stress on the power switch. By adjusting the turn s ratio of coupled inductor high step up gain can be achieved. Additionally, the energy stored in the leakage inductor of the coupled inductor can be recycled to the output capacitor. Low rated switch with low RDS-ON reduces conduction losses. Circuit simulations of open loop results are presented and are shown to have excellent agreement with the fundamental analysis.


Full Text:

PDF

References


S. Lee, P. Kim, S. Choi. High step-up soft-switched converters using voltage multiplier cells. IEEE Trans. Power Electron. 2013; 28(7): 3379 3387p.

Omar Hegazy, Joeri Van Mierlo, Philippe Lataire. Analysis, modeling,

and implementation of a multi device interleaved DC/DC converter for fuel cell hybrid electric vehicles. IEEE Trans on Power Electronics. 2012;

(11).

Y. Deng, Q. Rong, W. Li, et al. Singleswitch high step-up converters with built-in transformer voltage multiplier cell. IEEE Trans. Power Electron. 2012; 27(8): 3557 3567p.

Y. Deng, Q. Rong, W. Li, et al. Singleswitch high step-up converters with built-in transformer voltage multiplier cell. IEEE Trans. Power Electron. 2012; 27(8): 3557 3567p.

L.S. Yang, T.J. Liang, H. C. Lee, J. F. Chen. Novel high step-up DC DC

converter with coupled-inductor and voltage-doubler circuits. IEEE Trans.

Ind. Electron. 2011; 58(9): 4196 4206p.

S.Dwari, L. Parsa. An efficient highstep- up interleaved DC DC converter with a common active clamp. IEEE Trans. Power Electron. 2011; 26(1): 66 78p.

A. Nami, F. Zare, A. Ghosh, F. Blaabjerg. A hybrid cascade converter

topology with series-connected symmetrical and asymmetrical diodeclamped H-Bridge cells.IEEE Trans. Power Electron. 2011; 26(1): 51 65p.

K. B. Park,G. W.Moon, M. J.Youn. Non-isolated high step-up boost

converter integrated with SEPIC converter. IEEE Trans. Power Electron. 2010; 25(9):1791 1801p.

G. Spiazzi, P. Mattavelli, J. R. Gazoli, et al. Improved integrated boost-fly back high step-up converter. In Proc. IEEE Ind. Technol. Conf.2010; 1169 1174p.

Robert Balog, Philip T. Krein, David C. Hamill. Coupled inductors a basic filter building block. IEEE Trans. Ind. Electron. 2009; 56(8): 3144 3152p.


Refbacks

  • There are currently no refbacks.