Open Access Open Access  Restricted Access Subscription Access

A Comparative Study of Pre Engineering Building by Working Stress Method and Limit State Method in Terms of Weight in Different Topographs: A Case Study

Mr Madhukaran, K S Madhusoodan, Dr. H Eramma

Abstract


In recent years the introduction of the pre-engineered buildings (PEB) concept in the design of structures made and designs in a much optimized way. The Pre Engineering Steel Building Structures have many advantages as compared to Conventional steel buildings in terms of weight and economy, by designing IS codes of IS 800-1984 and 2007 . In this study a structure width 48m, length 96m with clear height 7m and has Roof-slope 1:10, analysed and design is carried out considering 2D frames (end frame, frame without crane). The economy of the structure is discussed in in terms of its weight comparison between IS 800-1984 (WSM) & IS 800-2007(LSM), and also structure is analysed and designed in terms of weight in different wind zones.

Full Text:

PDF

References


C. M. Meera(June 2013).Pre-engineered building design of an industrial warehouse. International journal of engineering sciences & emerging technologies. Volume 5 Issue 2, pp:75-82

AijazAhmadZende, Prof.A.V. Kulkarni, AslamHutagi(Feb2013). Comparative Study of Analysis and Design of Pre-Engineered- Buildings and Conventional Frames. IOSR Journal of Mechanical and Civil Engineering, Volume5, Issue.

JatinD.Thakar, 2Prof.P.G.Patel. Comparative Study of pre-engineered steel structure by varying width of structure. International journal of advanced engineering technology, volume 4, issue 3.

SyedFiroz1, SarathChandra KumarB1, Design concept of pre-

engineered building. International journal of engineering research & applications, volume2, issue2, pp: 267-272.

G. SaiKiran, A. KailasaRao, R. PradeepKumar(Aug2014).Comparison of Design Procedures for Pre –Engineering Buildings (PEB): A Case Study. International Journal of Civil, Architectural, Structural & Construction Engineering, Volume8, No.4.

S.D.Charkha1 and LateshS (June 2014).Economizing Steel Building using Pre-engineered Steel Sections. International journal of research in civil engineering, architecture & design, volume2, issue2.

U. D. Dabhade1, N.A.Hedaoo2, Dr. L.M.Gupta 3 and Dr. G. N (2009).Time and Cost Evaluation of Construction of Steel Framed Composite Floor with Precast Concrete Floor. International Symposium on Automation and Robotics in Construction.

IS 875: part 1 to 5 code of practice for design loads (excluding earthquake loads) for buildings and structures.

Indian Standard: 800 – 1975; code of practice for use of cold formed light gauge steel sections

Indian standard; 800- 2007; general construction in steel – code of practice; 3rd revision, New Delhi; BIS


Refbacks

  • There are currently no refbacks.