Open Access Open Access  Restricted Access Subscription Access

ANALYSIS AND DESIGN OF INTZE WATER TANK USING SAP2000 SOFTWARE

H. Eramma, Naveen Kumar Kumar S M, Kavana K. N

Abstract


The present study emphasis is placed on the analysis and design of elevated water tank structures by manual method and by using SAP2000 software for gravity and lateral loading. A typical intze water tank is considered for the study. The structure is modeled using SAP2000 software using a combination of plate and line elements. The gravity loading consists of vertical and horizontal water pressure along with the self weight of the structure. The lateral loading is in the form of seismic loading as per the provisions of IS 1893. The structure is analyzed for combinations involving gravity and lateral loading. Push over analysis is also performed. The structure is then designed for the internal forces using SAP2000 and manual methods. The results of the present study reveal that SAP2000 is an convenient and efficient tool for the analysis and design of water tank structures .The push over curve reveals the ductility of the structure The results of design from SAP2000 and manual methods are in good agreement with each other.


Full Text:

PDF

References


. Sudhir K. Jain, O R Jaiswal (2007) “IITK-GSDMA Guidelines for Seismic Design of Liquid Storage Tanks”.

. Dr. Jagadish .G. Kori and Pavan .S. Ekbote (2013) “Seismic Behavior of RC Elevated Water Tank under Different Types of Staging Pattern” Journal of Engineering, Computers & Applied Sciences (JEC&AS) ISSN No: 2319-5606 Volume 2, No.8, August 2013

. Nitesh J Singh, Mohammad Ishtiyaque (2015) Design Analysis & Comparison Of Intze Type Water Tank For Different Wind Speed And Seismic Zones As Per Indian Codes International Journal of Research in Engineering and Technology Volume 04

. K.S.K Karthik Reddy, Harsh kaviti (2015) “Analysis and Design of Elevated Intze Water tank and its Comparative Study in Different Wind Zones - using SAP2000” Volume 2 Issue2

. Bugatha Adilakshmi1, Paliki Suribabu (2016) “ Design, Analysis And Optimization Of Intze Type Water Tank For Different Parameters As Per Indian Codes” International Journal Of Advanced Research In Science And Engineering Volume5,Special No.(01)

.Ms. Rupal Gondalia1, Asst. Prof. Dhananjay Patel (2017) “Non-Linear Static Pushover Analysis On Elevated Storage Reservoir “Scientific Journal Of Impact Factor Volume 4, Issue 4.

Stuctural Analysis Program SAP2000. “User’s manual, Computers and Structures, Inc., Berkley

. IS:1893-2002 (Part I), Criteria for Earthquake Resistant Design of structures, Bureau of Indian Standards, New Delhi.

. IS:456-2000, “Indian Standard Code of practice for Plain and Reinforced Concrete”, Bureau of Indian Standards, New Delhi.

. IS: 875 (Part 2)&(part3) 1987, Code of practice for design loads other than earthquake for buildings and structures: Imposed loads, Bureau of Indian Standards, New Delhi.

.SP: 16 (1980), Design aids for reinforced concrete to IS: 456-1978, Indian Standard Institution, New Delhi.

.IS:3370 (Part 1)-2009, Code of practice concrete structures for the storage of liquids.


Refbacks

  • There are currently no refbacks.