Latest Trends in Novel Applications of Various Heat Exchangers for Enhancement of Heat Transfer

Mr. Pandya Bhavik J., Ms. Megha C. Karia

Abstract


A heat exchanger is equipment used for transfer of heat from one medium to other medium. Heat exchangers are fundamental parts in many process industries (such as power plants or the chemical and the food industries), and as heat recovery units in the operation of many systems (such as domestic hot water production, space heating or car engines).In a compact structure of cryogenic and other industrial applications for enhancement of heat transfer, coil heat exchangers are generally used. Currently, increase in efficiency of heat exchanger and heat transfer rate of heat exchanger, lots of researchers are working on it.

Full Text:

PDF

References


Pramod S. Purandare, Mandar M. Lele, Raj Kumar Gupta (2014), ¡§Experimental investigation on heat transfer analysis of conical coil heat exchanger with 90 degree cone angle¡¨, Heat Mass transfer, Volume 46,pp. 1410ƒ{1418.

M. Ghazikhani, I. Khazaee S. M, S. Monazzam, J. Taghipour (2013), ¡§Experimental Investigation of the Vortex Generator Effects on a Gas Liquid Finned Tube Heat Exchanger Using Irreversibility Analysis¡¨, Arab J Sci Eng.,pp. 2107–2116.

Dillip Kumar Mohanty, Pravin Madanrao Singru (2012), “Numerical method for heat transfer and fouling analysis of a shell and tube heat exchanger using statistical analysis”, Korean J. Chem. Eng.,pp. 11441150.

Zinkevich, V. N. Sharifullin, A. V. Sharifullin (2010), “Analyzing the Effect on Heat Transfer due to Non uniform Distribution of Liquid Flow among the Tubes of a Shell and Tube Heat Exchanger”, Thermal Engineering ,pp. 807–809.

LIU Wei, LIU ZhiChun, WANG Ying Shuang, HUANG SuYi (2009), “Flow mechanism and heat transfer enhancement in longitudinal flow tube bundle of shell and tube heat exchanger”,Sci China Ser E-Tech Sci,pp. 29522959.

Andre L.H. Costa, Eduardo M. Queiroz (2007), “Design optimization of shell and tube heat exchangers”, Applied Thermal Engineering, pp. 1798–1805.

Niphade et al., International Journal of Advanced Engineering Research and Studies, E-ISSN2249–8974 Int. J. Adv. Engg. Res. Studies/IV/IV/July-September,2015/13-15.

Dehghan B, Kukrer E. (2017), “A new 1D analytical model for investigating the long term heat transfer rate of a borehole ground heat exchanger by Green’s function method”,Renew Energy, Volume 108, pp. 615–621.

Farabi-Asl H, Fujii H, Kosukegawa H. (May 2018), “Cooling tests, numerical modeling and economic analysis of semi-open loop ground source heat pump system”,Geothermics, Volume 71, pp. 34–45.

Bezyan B, Porkhial S, Mehrizi AA. (2015), “3-D simulation of heat transfer rate in geothermal pile-foundation heat exchangers with spiral pipe configuration”,ApplThermEng, Volume 87, pp. 655–668.


Refbacks

  • There are currently no refbacks.