Simulation Software Based Analysis of Automotive radiators: a Review

Mr. Abhishek Gakare, Mr. Ashutosh Sharma

Abstract


The thermal execution of a vehicle radiator assumes an essential role in the execution of a vehicles-cooling system and all other connected system. For various years, this element has experienced little consideration with almost no changing in its built-up cost, geometry and operation. Compared with the longstanding tubular heat exchangers at present frame the foundation of the present procedure industry with their innovative performance reading levels tubular heat exchangers they are commonly utilized. Present review focuses on the different research with respect to CFD Analysis to increase vehicle radiator efficiency. present paper is an examination about the impact of different parameters like size of radiator core, way flow of working fluid, frontal zone of radiator, space in fins, pitch area of tube, tube and fin shape, mass flow rate of coolant, fins material, velocity of fluid, pitch area of tube, inlet temperature of air and different parameters to develop vehicle radiator determination and efficiency of advanced geometry from above parametric investigation. The Computational fluid elements (CFD) simulations were comparing the pressure drop and heat transfer of heat exchanger with various parameters for ideal performance. CFD results have high correspondence level by authentic experimental outcomes. Several results of review recommend that CFD have been shown very effective in decreasing production cost and testing time.


Full Text:

PDF

References


Beck S. M. B., Grinsted S. C. & Blakey S. G., et al., A novel design for panel radiators. Applied Thermal Engineering, 2004; 24: pp. 1291-1300.

Patel J.R. & Mavani A.M. Review Paper on CFD Analysis of Automobile Radiator to Improve its Thermal Efficiency; 2: pp. 268-271.

Patel H.B., Dinesan M.D., Patel H.B. & Dinesan M.D. Optimization and

performance analysis of an automobile radiator using CFD - a review. Int J Innov Res Sci Technol. 2015; 1(7): pp. 123-126.

Jyothi Y., Rajesh M. & Naidu M.C. CFD Analysis of an Automobile Radiator With and Without Louvered Fins Using Nano Fluids. Development. 2017; 4(8).

Kumar R.K. & Amirtha Gadeswaran K.S. Experimental study and CFD Analysis of Copper radiator for Passenger Cars. International Journal of Engineering Research. 2016; 5(9): pp. 778-782.

Patel H.B., Dinesan D., Patel H.B. & Dinesan D., Performance Analysis of an Automobile Radiator using CFG. International Journal for Innovative Research in Science & Technology 2016; 1: pp. 318-322.

Trivedi P.K. & Vasava N.B. Effect of variation in pitch of tube on heat transfer rate in automobile radiator by CFD analysis. International Journal of Engineering and Advanced Technology. 2012; 1(6): pp. 180-3.

Sridhara S.N., Shankapal S.R. & Babu V.U. CFD Analysis of Fluid Flow and Heat Transfer in a Single Tube-Fin Arrangement of an Automotive Radiator. In International Conference on Mechanical Engineering. December 2005.


Refbacks

  • There are currently no refbacks.