Browse Title Index


 
Issue Title
 
Vol 3, No 2 (2018) Experimental Study of WEDM Process Parameters during the Machining of Aluminium Metal Matrix Composite (AMMC) Abstract
Ch. Maheswara Rao, B. Naga raju
 
Vol 2, No 2 (2017) Experimental Study to Enhance the Performance of Heat Transfer in Fire Tube Boilers Abstract
Dr. Basima Salman Khalaf
 
Vol 5, No 2 (2020) Fabrication and Characterization of Sic and Al2o3 Particles Reinforced Al6061 Metal Matrix Composites Abstract
K. Jayanendra Babu, SK. Jakeer Hussain, K. Rama Kotaiah
 
Vol 5, No 3 (2020) Failure Analysis of Gears Subjected to Pitting and Wear Abstract
Vijay Rathor, Prashant Kirange
 
Vol 5, No 2 (2020) Finite Element Modelling and Analysis of Pre-Stressed Draft Pad of Freight Wagon Abstract
Abhishek C P, Dr. Ramesha H, Mr. Vinayaka H L
 
Vol 2, No 2 (2017) Four Cylinder Four stroke SI Engine Abstract
Subramaniyan Raj, Rama iyer
 
Vol 4, No 3 (2019) Gravity a Viscoelastic Mechanics of the Universe Abstract   PDF
Mr. Anwar Wali Gutti
 
Vol 4, No 2 (2019) Hazard Identification and Risk Assessment in Welding Shop and Powder Coating Abstract
Mr. Sundarapandian D, Mr. Muthukumar K
 
Vol 5, No 2 (2020) Measurement of Cutting Forces During Machining of A356-Sic MMCs Abstract
Ashok Kumar M S, Vijaya G, Shiva prasad D
 
Vol 2, No 1 (2017) Mechanical properties of impregnated wood Abstract
Asif khan, Engr.Md.Rafiq Rahman
 
Vol 1, No 1,2,3 (2016) Multipurpose Pedal Operated Power Generation and Water Pumping Abstract
Shrinivas Timmanagoudar, Ravi Kamballi, Mahalaxmi K, Avinash a, S. N. Mathad
 
Vol 4, No 3 (2019) Occupational Hazards in the Textile Printing Process Abstract   PDF
OMKUMAR C S, Muthu Kumar K
 
Vol 3, No 2 (2018) Optimal modeling of spindle-tool system with design variables using Taguchi based approach Abstract
Jakeer Hussain Shaik, K Rama Kotaiah, Mansoor Ahmed Ahmed S, Venkat Royal M, Gopi Krishna K
 
Vol 5, No 3 (2020) Optimization of Single Point Cutting Tool Parameters by Turning Operation in Lathe Machine to Minimise Surface Roughness Abstract
Dhanraj Patil, Manoj Raut, Rahul Dubey
 
Vol 5, No 3 (2020) Optimization of Wire EDM Process Parameters in Machining SS316 Using DEAR Method Abstract
MAheswara Rao
 
Vol 5, No 2 (2020) Performance Evaluation of Mono Suspension Using Neodymium Magnets Abstract
V. Chandran, G. Vignesh, P.L. Silambarasan, S. prithiviraj, G. Avineshkumar
 
Vol 4, No 2 (2019) Physical and Mechanical Properties of Pressed Palm Oil Fruit Fiber Reinforced Epoxy Composite for Building Partition Panels Abstract
I C Ezema Ike-Eze, N C Obiegbusi, V S Aigbodion, A D Omah, S N Ude, C A Mgbemene
 
Vol 3, No 3 (2018) Preference Number Based Taguchi-Utility Method for the Optimization of Multiple Responses Abstract
Asst.prof. Ch. Maheswara Rao, Prof. K. Venkata Subbaiah
 
Vol 4, No 2 (2019) Protective Helmet Types with Materials and Methods of Construction Abstract
Dr. Nemailal Tarafder
 
Vol 2, No 3 (2017) Research development of Powder mixed electro discharge machining (PMEDM) Abstract
fajar nur ali
 
Vol 1, No 1,2,3 (2016) "SHAPE OPTIMIZATION OF ‘PANCAKE’ TYPE LOAD CELL USING TAGUCHI METHOD" Abstract
B. K. Khot, V. A. Kamble, D. M. Kalai
 
Vol 3, No 2 (2018) Solenoid Operated Gear Shifting Mechanism for Two Wheeler Abstract
Amol Shitole, Pavan Kotari, Poonam Magdum, Omkar Sutar, Swapnil Toraskar, Prajakta R. Patil
 
Vol 2, No 1 (2017) Stress analysis of pipe T joints Abstract
HUSSAIN MASOOD
 
Vol 5, No 3 (2020) Structural and Thermal Analysis on Cylinder Head of VCR Diesel Engine Using ANSYS Abstract
K. Satyanarayana, Ch. Maheswara Rao, B. Nagaraju, A. Swathi
 
Vol 2, No 2 (2017) Study of Tribological Characteristics of Journal Bearing using Mixture of different Bio-Lubricants Abstract
Abhirama Urs N., Patil Shivprasad, Ajith Kumar, Kemparaju H R
 
26 - 50 of 60 Items << < 1 2 3 > >>